Mega 100 WR Specifiche Scaricare il pdf (Pagina 40)

Mega 100WR ADSL2+ Router - Manual

Page 39 of 54

In other words, if you wish to have both a 10.0.0.0. network and a 192.168.1.0 network

locally , with a firewall or some other interconnecting device at 10.0.0.10, and wish to

have both local networks access the internet through your Mega 100W, you would set as

follows : new IP address = 192.168.1.0 mask = 255.255.255.0 and Gateway = 10.0.0.10

I.e.: if anybody on the 10.0.0.0 network is looking for any device on the 192.168.1.0

network (any of the 255 ip addresses in this range), the router will re-direct the requests to

follow the path via 10.0.0.10, and not via its own WAN interface as it would normally.

See Figure 4-32.

Figure 4-32 : Static Routing

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 54 55

Nessun commento

Mega 100 WR Specifiche Pagina 40